No single setting is given by every source for every household, because the sources are answering different questions. Federal household guidance on energy and scalds points to 120°F for most households. Legionella guidance written for building water systems describes higher storage temperatures with scald protection at the tap. Manufacturers ship units at settings of their own and print their own warnings. This page lays out who says what, for which audience, so you can decide what to ask, not copy a number.
Safety first. Hot water can scald, and electric and gas water heaters carry shock and gas hazards. This page does not walk you through opening a heater’s access panel. If you are not sure how to adjust your unit safely, stop and ask a professional or follow the manual for your exact model.
Who Is Answering Which Question
The documents below are written for different readers, so they should not be read as competing answers to one question. One group speaks to households weighing energy use and scalds. Another speaks to building owners managing Legionella risk. A third is the manufacturer, speaking about its own product. None of them gives a rule for a particular Lancaster home.
| Source | Written for | What it says |
|---|---|---|
| U.S. Department of Energy, Lower Water Heating Temperature (archived May 22, 2026) | Households weighing energy and safety | The Department of Energy says most households usually only require a setting of 120°F, and that water heated to 140°F poses a scalding hazard. It calls the Legionella risk at 120°F very slight and says that level is still considered safe for the majority of the population, with an exception: people with a suppressed immune system or chronic respiratory disease may consider 140°F, which it says significantly increases scald risk, so mixing valves or other temperature-regulating devices can help. |
| U.S. Department of Energy, renters page | Renters and other consumers | The Department of Energy says adjusting from 140° to 120° can reduce scald risk, slow build-up in pipes and potentially save money, and that people with a compromised immune system or chronic respiratory disease may want to keep 140°. |
| U.S. Consumer Product Safety Commission, Publication 5098, Tap Water Scalds | Consumers, with a focus on children and the elderly | CPSC urges users to lower water heaters to 120°F, and notes that a 120°F thermostat setting may be necessary for residential water heaters to reduce or eliminate the risk of most tap water scald injuries. |
| U.S. EPA, Legionella in the Indoor Environment | Homeowners and building managers | The EPA says setting the thermostat at or above 140°F can often keep temperatures above 124°F throughout the plumbing system to prevent Legionella growth, warns that hot water at the faucet may present a scalding risk above 117°F, and advises checking state or local building codes for any restrictions on increasing water heater temperatures. |
| CDC, Controlling Legionella in Potable Water Systems | Managers of building water systems | The CDC toolkit recommends storing hot water above 140°F, keeping circulating hot water from falling below 120°F, and installing thermostatic mixing valves as close as possible to fixtures to prevent scalding. |
| CDC, vacation rental owners and managers | Owners of short-term rental properties | The CDC says to set the water heater at or above 120°F to minimize Legionella growth, says 130–140°F can kill many harmful germs but increases scalding risk, advises following state and local scalding laws, and advises thermostatic mixing valves at the faucet or shower if the heater is set above 120°F. |
| Pennsylvania Department of Health, legionellosis fact sheet | The public | The fact sheet lists maintaining water temperatures outside the ideal growth range for Legionella as one prevention step. The excerpt we read gives no home thermostat setting. |
| State Water Heaters, residential electric manual | Owners of that product family | The thermostats are factory set near 120°F, marked HOT on the dial, and the manual says to use the lowest temperature setting that satisfies your hot water needs. |
| State Water Heaters, residential gas tankless manual (THR series) | Owners of those tankless models | The water temperature is set at 120°F from the factory, and the manual warns that temperatures over 125°F can cause severe burns instantly. |
Two of these sources are labelled as the Department of Energy’s consumer guidance, one of them an archived capture of a page that no longer loads at its original address. The archived capture is cited for what it said, not for current rebates or rules. We found no Pennsylvania or Lancaster-specific setting in any of them.
Why The Numbers Differ
The lower and higher settings in these sources answer different questions, so they are not a contradiction to be settled by picking one. What separates them is who is using the water, what kind of system holds it and what the setting is meant to prevent.
| Purpose | Audience and system context | What the source says |
|---|---|---|
| Scald prevention and energy use | Households (Department of Energy) | The Department of Energy says most households usually only require a setting of 120°F, and that water heated to 140°F poses a scalding hazard. |
| Legionella control in a building | Managers of building water systems that store and circulate hot water (CDC toolkit) | The CDC toolkit recommends storing hot water above 140°F, keeping circulating hot water from falling below 120°F, and installing thermostatic mixing valves as close as possible to fixtures to prevent scalding. |
| Legionella control in a rental | Owners and managers of short-term rental properties (CDC) | The CDC says to set the water heater at or above 120°F to minimize Legionella growth, says 130–140°F can kill many harmful germs but increases scalding risk, advises following state and local scalding laws, and advises thermostatic mixing valves at the faucet or shower if the heater is set above 120°F. |
| A household member with a medical condition | Households where someone has a suppressed immune system or chronic respiratory disease (Department of Energy) | The Department of Energy says people with a suppressed immune system or chronic respiratory disease may consider 140°F, which it says significantly increases scald risk, so mixing valves or other temperature-regulating devices can help. |
Where a source describes a higher storage temperature, it pairs it with a mixing valve or other scald protection at the tap. For a home, the useful questions are who lives there, whether a mixing valve limits the tap, and what a clinician and the manual for your exact model say; the checklist at the end of this page collects them.
Scald Risk: What The Burn Times Say
Scald risk rises quickly with temperature, and the people most at risk are not always the people adjusting the dial. CPSC states that most adults will suffer third-degree burns if exposed to 150°F water for two seconds, and that burns will also occur with a six-second exposure to 140°F water or a thirty-second exposure to 130°F water. It adds that even at 120°F, a five-minute exposure could result in third-degree burns.
CPSC says the majority of injuries and deaths involving tap water scalds are to the elderly and children under the age of five. The State Water Heaters electric manual lists the elderly, children, the infirm and the physically or mentally handicapped as people more likely to be permanently injured, and says that where anyone in the home fits one of those groups, or where a local code or state law requires a certain tap temperature, special precautions are needed. The same manual says never to allow small children to use a hot water tap or draw their own bath water, and never to leave a child or handicapped person unattended in a bathtub or shower.
These figures describe exposure to water at the stated temperature. They do not tell you what your own tap delivers, which depends on the thermostat, the pipe run and how long the water has been standing; the check later on this page is how you find out.
What The Legionella Guidance Covers
The Legionella documents are mostly written for building water systems and rentals, and they are not a household thermostat rule. The CDC toolkit describes a growth range most favorable to Legionella of 77–113°F, notes that Legionella may grow at temperatures as low as 68°F, and recommends storing hot water above 140°F and circulating it above 120°F in the building systems it addresses. The EPA says keeping water in indoor plumbing either above 124°F or below 80°F can help control the bacteria, and that typical cold-water systems are unlikely to support growth except in warm climates.
For a single-family home the sources split. The Department of Energy treats 120°F as acceptable for the majority of the population and points people with a suppressed immune system or chronic respiratory disease toward considering 140°F with scald protection. The EPA describes 140°F or above as a way to keep temperatures high through the plumbing, and cautions about scalding and energy cost. We do not say which of these fits a given household. If someone in your home has a medical condition that affects infection risk, that is a question for their clinician as well as for a plumber.
Multi-unit buildings with a centralized hot water system need a Legionella water management program, the CDC says; that is a building-management matter, not something a tenant sets on a dial.
Mixing Valves: Holding A Hotter Tank Without A Hotter Tap
A thermostatic mixing valve blends hot and cold water to limit the temperature at the tap, and several sources point to one wherever a tank runs hotter than the tap should. The State Water Heaters gas tankless manual describes thermostatic mixing valves as valves that automatically mix hot and cold water to limit the temperature at the tap, and recommends installing them at each point of use. The CDC advises them at the faucet or shower when a rental heater is set above 120°F, and the EPA tells readers who choose to install them to follow the manufacturer’s instructions or have a professional do the work. The State electric manual says a mixing valve should be used at the taps used by at-risk people or at the water heater.
Where the valve goes, and how it is set, changes what it protects, so this is a plumbing job to scope with a professional. It is also a line item to look for in any installation quote if the plan is a higher tank setting.
Check What Your Tap Actually Delivers
Measure the water at the tap before and after any change, because the dial is not a thermometer. The Department of Energy’s archived instructions say to measure the beginning temperature of your hot water with a thermometer at the tap farthest from the water heater, note that thermostat dials are often inaccurate, and say to wait a couple of hours and measure again after adjusting. CPSC suggests holding a candy or meat thermometer under the faucet, reading it first thing in the morning or at least two hours after water use, and adjusting the thermostat according to the manufacturer’s instructions if the reading is too high.
Test with care: water at the tap can scald before the reading settles. Run the water onto a thermometer in a container rather than holding your hand in it, and keep children out of the room.
Changing The Setting Safely
Follow the manual for your exact model, and cut power or gas as it directs before touching any panel. The State electric manual lists adjusting the thermostats as a procedure that starts by turning the electrical power to the water heater off at the junction box, and it warns of electrical shock before any access panel is removed. Its dial markings are approximate: HOT is about 120°F, A about 130°F, B about 140°F, C about 150°F and VERY HOT about 160°F, and the manual says to set the dial lower whenever possible. Those markings belong to that manual. Another manufacturer’s A, B or C marks may mean something different, so read your own.
On gas storage heaters, CPSC says thermostats differ, suggests asking your local gas company for instructions, and says to adjust the thermostat according to the manufacturer’s instructions. Tankless units, such as the State THR series, are adjusted from the controller, with the temperature buttons described in the manual. Heat pump units have their own modes; this page does not cover them, so check the manual.
If you rent, check your lease and ask the landlord before changing a setting, and note that the CDC points property owners to state and local scalding laws. This page states no Pennsylvania or Lancaster scald or rental temperature rule because we did not find an official one to cite.
Not sure how to adjust your unit safely, or want a mixing valve priced? Call (717) 500-8528.
Dishwashers And Other Things The Setting Touches
The setting interacts with appliances and energy use, and the sources describe those links in their own terms. The Department of Energy’s archived page says a dishwasher without a booster heater may require water in a range of 130°F to 140°F for optimum cleaning. The State electric manual notes that a water temperature range of 120°F to 140°F is recommended by most dishwasher manufacturers. Check your dishwasher’s own manual rather than assuming either.
On energy, the Department of Energy says savings from turning the temperature down come from reducing standby losses, which is heat lost from the heater into the surrounding area. We give no savings figure for a Lancaster household. The EPA notes that a thermostat at or above 140°F may increase energy use, and suggests insulating pipes to moderate it; our insulation blanket guide covers the tank side of that question.
If the water is too hot even at a low setting, or there is not enough hot water, the State manual’s troubleshooting points back to the thermostat setting first. Our no hot water guide covers the other direction.
Questions To Settle Before You Change The Dial
- Who uses the hot water? Young children, older adults, and anyone with a condition affecting infection risk change the answer; see the sources above.
- Is there a mixing valve, and where is it? At the heater, at fixtures, or both.
- What does the tap deliver now? Measure at the farthest tap, not the dial.
- What does the dishwasher’s manual say?
- What does the manufacturer’s manual say for this exact model, including its factory setting and warnings?
- Does a lease, a building rule or a local code apply? We state none.
For service, see water heater repair in Lancaster, PA and water heater maintenance. If the heater is leaking or smells of gas, use our shut-off guide first.
Sources Used
U.S. Department of Energy, Do-It-Yourself Savings Project: Lower Water Heating Temperature (archived capture, May 22, 2026) and the renters page (read October 25, 2026); U.S. Consumer Product Safety Commission, Publication 5098, Tap Water Scalds; U.S. EPA, Legionella in the Indoor Environment; CDC, Controlling Legionella in Potable Water Systems and the vacation rental owners page; Pennsylvania Department of Health legionellosis fact sheet; State Water Heaters residential electric and gas tankless manuals. The archived Department of Energy capture is not used for current incentives, rules or availability. Details and excerpts are in our claims registry.
Want Help Adjusting Or Protecting Your Hot Water Temperature?
Service requests and emergency service are available 24/7 across Lancaster City and Lancaster County.
Call For Emergency ServiceWater Heater Temperature FAQ
Is 120 or 140 degrees better for a water heater?
Neither is correct for every household, because the sources are answering different questions. The Department of Energy and CPSC point most households to 120°F; the CDC and EPA describe 140°F or higher storage for Legionella control in the settings they address, with scald protection. Measure your tap, check the manual, and ask a professional about a mixing valve if you choose a higher tank setting.
Does a lower water heater setting cause Legionella at home?
The sources do not say so for a typical household. The Department of Energy describes a very slight risk at 120°F that it considers safe for the majority of the population, and suggests people with a suppressed immune system or chronic respiratory disease consider 140°F. The CDC and EPA guidance on higher temperatures is aimed at building water systems and rentals. Ask a clinician if someone in your home has a relevant condition.
What do the A, B and C marks on a water heater dial mean?
It depends on the manufacturer. In the State Water Heaters electric manual, HOT is about 120°F, A about 130°F, B about 140°F and C about 150°F. We did not read other brands’ manuals for this page, so read the one for your unit.
How do I check the real water temperature at my tap?
Use a thermometer at the tap farthest from the heater. The Department of Energy says dials are often inaccurate and to measure again a couple of hours after an adjustment; CPSC suggests reading it first thing in the morning or at least two hours after water use.
Will turning the temperature down save energy?
The Department of Energy says the savings come from reducing standby heat loss. It gives no figure we can apply to a Lancaster home, and we state none.
Who can help adjust a water heater near me in Lancaster County?
Lancaster Water Heater Pros services water heaters across Lancaster City and Lancaster County. Call (717) 500-8528 and tell us the make and model. Service requests are accepted 24/7.